NEC AccuSync LCD72VM - Page 88

4-36
6.Panel Brightness Check
1) Enter the input signal of 1280×1024 @75Hz, in Full white pattern.
2) Proceed “Factory Preset” function of miscellaneous menu.
3) OSM setting “BRIGHTNESS” to Max. (100%) and “CONTRAST” to 100%.
4) Color temperature setting to “USER” (R: 100%, G: 100%, B: 100%).
5) Check the center luminance should ≥ 250cd/m
2
.
7. Panel Color Check
1) Enter an input signal of 1280×1024 @75Hz, in Full white pattern.
2) Proceed “Factory Preset” function. Brightness: 100%, Contrast:100%
3) Color temperature setting to “USER” (R: 100%, G: 100%, B: 100%).
4) Check the center color coordination. x = 313 ±10, y = 329 ±10,Y=190±10
8.Color Temperature Check
1) Enter an input signal of 1280×1024 @75Hz, in Full white pattern.
2) OSM “BRIGHTNESS” setting to Max. (100%) and “CONTRAST” setting to 50%.
3) Color temperature setting to each color.
4) Each color temperature setting as below:
9300K: x = 283 ±10 y = 297 ±10 Y=170±10
7500K: x = 299 ±10 y = 315 ±10 Y=170±10
6500K: x = 313 ±10 y = 329 ±10 Y=190±10