QUICK REFERENCE
14
Stored Data Function Contents of Data
Feature Access Code settings
Ring Tone 1: Low Tone (default)
2: Mid Tone
3: High Tone
PBX Trunk Access Code 0~9 (default = not assigned)
Hook Flash Timing 00: 95ms
01: 100ms
02: 120ms
03: 180ms
04: 270ms
05: 300ms
06: 600ms (default)
CID Receiving Mode FSK
NOTE
Please note the stored data marked with “*” will be deleted by disconnecting the line cord. If there is
important data, it is recommended to record the data before disconnecting the line cord.
Operations
Feature Operation Telephone State
LCD Contrast Press VOLUME
Idle
Handset Volume
Handset Volume Control
Switch
Mute Handset Press MUTE
Off Hook Handset
To Next Page
Loading...
