NEC DS1000/2000 User Manual

Cordless Telephone
User Guide
(03.14.00)
– Please Read –
Important Cordless Telephone Installation Information
DS1000/2000 900 MHz Cordless Telephone Installation Tips
• The cordless telephone base unit plugs into a digital station port.
• For best results, the base unit should be placed in line-of-site with its handset.
• Cordless telephone range and reception can vary from site to site. Some of the things that
may adversely affect range and reception are:
- Placing the base against or close to a wall (particularly if the wall has metal studs).
- Positioning the base close to a device that emits Electromagnetic Interference (EMI),
such as a TV, radio, computer, fluorescent light, fax machine, or printer.
- Installing the base close to other 900 Mhz devices, such as Symbol or Telex hand-held
inventory devices.
- Installing the base above a ceiling that uses foil-backed insulation.
- Installing the base behind a door which can be closed, tinted windows, or one-way glass
which will separate the base from the handset.
• Always raise the base unit antenna to its full vertical position.
• When installing more than one cordless telephone in the same site:
- Be sure the base units are at least 15 feet apart.
- After installation, change each telephone’s channel by pressing CH on the handset. This will
minimize interference between your cordless telephones. There are 30 available channels.
• The handset must charge 5-8 hours in its charger prior to initial use.
• The Nickel Metal Hydride Rechargeable Battery Pack is recyclable. If you replace a battery
pack, always dispose of the old pack along with your other recyclable materials.

NEC DS1000/2000 Specifications

General

Display	LCD
Caller ID	Yes
Intercom	Yes
Number of Handsets	Up to 8
Conference Calling	Yes
Headset Jack	2.5mm
Power Source	AC adapter

Summary

Important Cordless Telephone Installation Information

DS1000/2000 900 MHz Cordless Telephone Installation Tips

Key tips for optimal placement and multi-unit installation to ensure clear reception.

Chapter 1: Installation

Introduction and Basics

Overview of the cordless telephone and its basic operational features.

Base Unit Installation Procedures

Steps for connecting and mounting the base unit, including placement guidelines.

Handset, Charger, and Accessory Setup

Instructions for battery installation, charging, mounting the charger, and headset/clip setup.

Specifications and Parts Overview

Technical specifications and available parts/accessories for the cordless telephone.

Chapter 2: Features

Feature Operation Details

Detailed explanation of various telephone features and their operation.

Feature Summary

A summary table detailing feature availability, default settings, and comments.