Installation
Using the Belt Clip
12 ◆ Chapter 1: Installation DS1000/2000 Cordless Telephone User Guide
Using the Belt Clip
Installing the Belt Clip
To install the belt clip (Figure 11: Installing the Belt Clip):
■ With the open end of the clip facing away from the antenna, snap the belt clip onto the handset.
Figure 11: Installing the Belt Clip
To remove the belt clip (Figure 12: Removing the Belt Clip):
■ Gently pry the belt clip prongs out of the slots in the handset.
Figure 12: Removing the Belt Clip
80683 - 8
Snap prongs into slots
80683 - 9
Snap prongs into slots
on other side
80683 - 10
Pry prongs up from slots
To Next Page
Loading...
