NEC DTERM SERIES E User Manual

INTRODUCTION
The telephones installed during the MCCCD
Telecommunications Improvement Project are NEC Dterm
Series E digital terminals. They are designed with dedicated
function keys, programmable line keys, and soft feature keys
and will work only with MCCCD's NEAX telephone system.
As always, you can call each Maricopa location by dialing the
5-digit extension number. Please be reminded, only dial "9"
plus the number when you are dialing outside of MCCCD.
LONG-DISTANCE CALLS - BUSINESS
To place a long-distance call, it is necessary to have an
authorization code. Long-distance calls may be placed from
most telephones using your authorization code.
To place a long-distance call:
1. Dial 9 for an outside line.
2. Dial 1 and the number you are calling.
3. When you hear a fast busy signal, enter your 7-digit
authorization code.
LONG-DISTANCE CALLS - INTERNATIONAL
1. Dial 9 for an outside line.
2. Dial the country code and number
3. When you hear a fast busy signal, enter your 7-digit
authorization code.
LONG-DISTANCE CALLS - PERSONAL
All personal long-distance calls must be charged to your
home or appropriate calling card, or placed collect to the
called party.
To Use the Call Back Feature:
1. When you encounter a busy signal, press the soft key
"CBack" button once (receive dial tone). Hang up the
handset.
2. When your phone rings with the 3-series ring, lift the
handset. Automatic call back will be initiated and you
will hear the phone ring at the called station.
Note: A call back ring can be picked up only from the station
initiating the call. Other stations with that line
appearance cannot retrieve a call back call. Only
one call back perphone can be set.
EXIT
The EXIT key is necessary to EXIT the HELP feature.
To exit the HELP feature:
1. Depress the EXIT key.
HEADSET
A headset device can be used with your terminal to allow for
greater flexibility between telephone work and work requiring
the use of your hands.
Note: Not all phones have been equipped with the "headset"
soft key feature.
To activate the HEADSET:
1. Depress the Soft Key below “HEADSET”. The primary
extension LED will illuminate when HEADSET is
activated.
To deactivate the HEADSET:

NEC DTERM SERIES E Specifications

General

Brand	NEC
Model	DTERM SERIES E
Category	Telephone
Language	English