NEC Series E - User Manual

D
TERM
®
SERIES E
Agent Console
USER GUIDE

NEC Series E Specifications

General

Speakerphone	Yes
Programmable Keys	Yes
Headset Jack	Yes
Volume Control	Yes
Display	LCD
Power Supply	Via Phone System
Compatibility	NEC Phone Systems

Summary

Dedicated Function Keys and Lamps

To Log On When ID Code Is Required

To Log On When ID Code Is Not Required

To Log Off With or Without ID Codes

To Set Automatic Answer

To Set Manual Answer

To Answer;Release an Incoming ACD Call

To Hold a Call

To Transfer a Call to Split Queue

To Set;Reset Break Mode

Work Mode During a Call

Tally Count

Call Conference;Transfer

To Place an Emergency Call

To Originate an Outside Call

To Originate an Internal Call

To Originate a Call Using Speed Calling (One-Touch Keys)

Conference

Call Waiting - Originating

Program Call Waiting Key

Procedure to program the Call Waiting key on a one-touch speed dial key.

Activate Call Waiting - Originating

Steps to activate call waiting when originating a call.

Call Park

Program Call Park Key

Procedure to program the Call Park key on a one-touch speed dial key.

Last Number Redial

Recall Last Dialed Number

Procedure to redial the last dialed telephone number.

Call Forwarding - All Calls

Set Call Forwarding

Steps to set call forwarding for all incoming calls to a destination.

Cancel Call Forwarding

Procedure to cancel the call forwarding setting.

Call Back

To Save and Repeat a Number

Save a Number

Procedure to save a dialed telephone number or internal call.

Repeat Saved Number

Procedure to automatically redial a previously saved number.

To Establish External Data Transmission Via Modem Pooling