NEC Series E - Call Back

40
CALL BACK
IF CALLED STATION IS “BUSY”
♦ Press CALL BACK
key if; receive
Service Set tone.*
– OR –
♦ Press FLASH key** and enter CALL BACK
access code.
♦ When both parties
become idle, calling
party’s phone rings.
Calling party would
go off hook and hear
ring back tone. The
called station would
then be ringing.
2000CB
Called Party
(Time display)
CB SET
(Time display)
2000
♦ Lift handset, then
called party’s
phone rings.
♦ Connection is established when called
party answers.
NOTE: Call Back may be programmed by the PBX
Engineer on a Programmable Line/Feature key or by
the user on a Speed Calling One-Touch key.
*Service Set tone is optional depending upon system programming.
**
FLASH key must be programmed on ONE-TOUCH SPEED
call key.
2000CB
Calling Party