♦ Receiving station
presses DATA key.
♦ Data is established.
♦ To disconnect from DATA call, either
originating or receiving station can press
DATA key.
♦ Released station’s
display indicates:
NOTE: If receiving station is programmed for Auto
Answer, disregard this step.
TO ESTABLISH EXTERNAL
DATA TRANSMISSION
VIA MODEM POOLING
♦ Internal station user initiates a voice
conversation to an external party.
♦ External party switches over from voice
to modem, or modem carrier tone is heard
immediately.
♦ After hearing
modem carrier
tone, originating
(internal) station
presses DTX key.
♦ Originating station‘s DTX lamp lights and
Service Set tone is heard, replace handset.
♦ Called data terminal answers.
♦ DATA connection is established.
NOTE: If internal station is programmed for Auto
Answer, disregard this step.
To Next Page