37
– OR –
♦ Dial DIRECT CALL PICK-UP Access Code and
the station number to be picked up.
♦ Connection to
calling party is
established.
– OR –
♦ Press programmed ONE-TOUCH SPEED key.
♦ If busy, original call must be placed on hold
before new call can be picked up.
OUTGOING
TRUNK QUEUING
If trunk “Busy”:
♦ Receive TRUNK
BUSY indication;
press CALL BACK key.
Call is placed in queue for next available trunk.
♦ When trunk is available, setting station is
alerted by ringing and flashing red LED.
♦ Lift handset or headset.
♦ Press NON-ACD LINE key.
♦ Dial tone is heard or number is automatically
dialed if NEAX2400 IMS is programmed with
Least Cost Routing.
To Next Page
Loading...
