28
TO ORIGINATE A CALL
USING SPEED CALLING
(ONE-TOUCH KEYS)
♦ Press NON-ACD LINE key.
♦ Press desired SPEED CALL key, or press SPKR
and SPEED CALL.
TO PROGRAM
(Available only on D
term
stations with speed
calling keys).
♦ Press FEATURE key.
♦ Press desired SPEED CALL key.
♦ Enter desired
telephone number
or feature code on
the keypad. Display
indicates digits dialed.
TO VERIFY
♦ Press FEATURE key.
♦ Press desired SPEED CALL key.
♦ Display indicates digits programmed.
NOTE 1: To program a hookswitch for transfer or
feature activation, press RELEASE key as first digit
(“!” displays on LCD).
NOTE 2: To program a pause, press RELEASE key as
any digit other than the first (“-” displays on LCD).
NOTE 3: To program a Voice Call press TRANSFER
key after dialing station number (“V” displays on LCD).
NOTE 4: Speed calling for feature access: Speed
call keys may be used as feature keys by storing the
NEAX2400 feature access codes. The feature may be
programmed on a system basis by the PBX engineer.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a cetain
extension.
To Next Page
Loading...
