NEC Series E - Do Not Disturb

43
TO RESPOND
♦ While displaying desired message; lift handset
and Press NON-ACD LINE key.
♦ Press MSG key; station which left message
will be automatically redialed.
TO ERASE
♦ Message is erased.
♦ To erase a message without returning the call,
press MSG key to display desired message.
♦ Dial # while message is displayed, message
is erased.
NOTE: If station which left message is busy,
callback or MSG may be set. If station which left
message does not answer, MSG may be set, thus
notifying originating party that a message return
was attempted.
MSG CNCL
(Time display)
DO NOT DISTURB
WHILE IDLE (ON HOOK)
♦ Press DND key*;
LED lights.
TO CANCEL
♦ Press DND key;
LED goes out.
*DND key must be programmed by the PBX engineer on a
programmable feature key.
DND CNCL
(Time display)
DND SET
(Time display)