NEC Series E - Call Park; Program Call Park Key

32
TO ESTABLISH
A BROKER CALL
♦ While engaged in a call and wishing to consult
a third party, press TRANSFER key; receive
interrupted dial tone, caller is automatically
placed on hold.
♦ Dial desired party to consult.
♦ Press TRANSFER key to return to original
caller. Third party is automatically placed
on hold.
♦ By repeating these steps, it is possible to
alternate between calls.
NOTE: Display will indicate connected station or
trunk at any given time.
TO ANSWER A
CAMPED-ON CALL
FROM THE ATTENDANT
♦ While engaged in a call, receive camp-on
indication (one short tone burst); the
ANSWER LED will flash.
♦ Press ANSWER key; call in progress is placed
on hold.
♦ Connection to camped-on call is established.
♦ By repeating these steps, it is possible to
alternate between calls.
NOTE: Display will indicate connected station or
trunk at any given time.
♦ Press ANSWER key
to return to original
call, camp-on call is
placed on Hold.
1CMP
WATS
TRK No.
TRK Type