NEC Series E - To Leave a Message; To Answer a Message

42
TO LEAVE A MESSAGE
♦ Lift handset.
♦ Press NON-ACD LINE key.
♦ Receive dial tone.
♦ Dial desired station number; encounter a
“No-Answer” or Busy condition.
♦ Press MSG key;
message is sent
to called D
term
Series E.
♦ Called station MSG LED lights.
NOTE:
•Up to four messages
can be stored in D
term
Series E memory.
If a fifth message is
attempted, ring back
tone is heard.
MSG BUSY
(Time display)
MSG SET
2000
Recipient Station
(Time display)
•If station is not
equipped to receive
messages, reorder
tone is heard.
TO ANSWER A MESSAGE
TO DISPLAY
♦ MSG LED LIT;
station is idle.
♦ Press MSG key; display indicates time of
message and station number leaving message;
♦ Re-press MSG key again to display additional
messages in order received.
12:28PMMSG
2000
(Time display)
MSG RST
(Time display)