NEC Series E - To Set Manual Answer; To Answer;Release an Incoming ACD Call

NOTE: Auto answer
is displayed and active
only if auto answer is
programmed.
NOTE: Work mode
is displayed and active
only if work mode has
been programmed.
♦ The WORK key
must be pressed
before the Agent
can begin taking
calls. The console is
now in Ready status.
(Time display)
READY
WORK MODE
(Time display)
AUTO ANSWER
(Time display)
TO LOG OFF WITH OR
WITHOUT ID CODES
FROM BREAK MODE, WORK MODE OR
READY STATUS
♦ Press LOGON key,
lamp is dark. Several
displays will cycle
on the display for 4
seconds each, ending
with farewell greeting.
NOTE: Name will only be displayed if LOGON ID
codes are used. During LOGOFF, ACD calls cannot
be received.
♦ The time since
LOGON in hours,
minutes and seconds.
SHIFT
(Time display)
6:38:08
LARRYGOODBYE
(Time display)
9