NEC Series E - To Log Off With or Without ID Codes

TO LOG ON WHEN
ID CODE IS REQUIRED
If the entered Log On ID code is currently in use,
the display indicates ID IN USE and then returns to
LOGON ID?
If an invalid ID code is entered, the display returns
to LOGON ID? and the Agent must enter a current
Log On ID.
From VACANT Status:
♦ LOGON lamp
is dark.
♦ Press LOGON
key, LOGON
key flashes.
LOGON
(Time display)
ID?
VACANT
(Time display)
♦ Dial Agent LOG
ID Code, press the
# key, digits dialed
are displayed. The
LOGON and
WORK lamps light
steadily; display
indicates greeting.
Then reviews the
following modes:
NOTE: Auto Answer
is displayed and active
only if auto answer is
programmed.
NOTE: Work mode
is displayed and active
only if work mode has
been programmed.
WORK MODE
(Time display)
SYS.SPLIT
(Time display)
CUST.
LARRYHELLO
(Time display)
7