NEC Dterm Series III - Volume Control; User Programmable Keys; Call Forward All; Call Forward No Answer

12. Volume control
To control volume of handset, ringer, display contrast.
• LCD Contrast: Press the "up and down" keys whilst idle.
• Speaker/Receiver Volume: Press "up and down" keys during conversation.
• Ringer Volume: Press "up and down" keys during ringing.
13. Microphone
14. Microphone Lamp
15. User Programmable Keys
12/20 keys can be used in any combination for speed dial, Direct Station Select (DSS) or feature
access.
To program Speed Calling:
• Press FNC button.
• Press desired Speed Call Button.
• Enter telephone number or feature code.
• Press FNC again to save.
To dial number in memory:
• Press desired Speed Call Button
To verify:
• Press FNC button.
• Press desired Speed Call Button.
Call Forward All
Forwards all calls immediately.
SET
• Lift handset.
• Press FWD ALL or dial "*1"
• Dial extension number your calls are to be forwarded to.
CANCEL
• Lift handset.
• Press FWD ALL or dial "#1"
Call Forward No Answer
Forwards only after 4-6 rings.
SET
• Lift handset.
• Press FWD NANS or dial "*2"
• Dial extension number your calls are to be forwarded to.
CANCEL
ATEL Communications, Inc. www.atelcommunications.com 858.646.4600