183
Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select a group name to be changed.
In this example, Default is selected.
Select an item by either of the following operations.
• Highlight an item by using , and then press
or OK soft key.
• Press key, and then press or OK soft key.
STEP 4: Select Name.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Enter a new group name.
Enter a group name by using digits keys. After entering
the group name, press or OK soft key.
To Next Page
Loading...
