190
• To Search by Memory ID
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: Select Search.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Others.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Memory ID.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Enter a memory number (0-499).
After entering the memory number, press or
OK soft key.
The list of memory numbers will be displayed, with
the entered memory number or the number clos-
est to the entered number in front.
STEP 6: Select a target name by pressing (Up/
down-cursor).
In the following Directory (Name List) screen,
you can make a call to the selected party by
pressing or Call soft key. If two or more tele-
To Next Page
Loading...
