194
• To Search by Company Name
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: Select Search.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 3: Select Others.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Company.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Enter a company name.
After entering the name, Press or OK soft key.
Note:
A distinction is made between upper case and
lower case characters. For example, "Ken
Kobus" and "ken kobus" are distinguished as dif-
ferent character strings.
Note:
A blank space is also distinguished while search-
ing database for a name.
Note:
Even if the name is not entered to the end, you
can search for a name.
Note:
Up to 32 characters can be entered as a com-
pany name. For details on character entry
method, see HOW TO INPUT CHARACTERS.
To Next Page
Loading...
