51
• TO ENABLE/DISABLE RTP ALARM
The procedure below shows how to enable/disable
RTP alarm.
STEP 1: While indicating the current time on LCD,
press key to open the Menu screen.
STEP 2: Select Setting (DT730) / Setting
(DT710)
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key (DT730) / key (DT710)
STEP 3: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Talk.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 5: Select RTP Alarm.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
To Next Page
Loading...
