NEC DTL-6DE-1 - DT310 - 6 Button Display Digital Phone - Page 80

72
STEP 6: Enter the new password and then press
or Set soft key.
STEP 7: Enter the new password again and then
press or OK soft key.
STEP 8: When the password entry completes suc-
cessfully, the display changes as follows.
Press
or OK soft key.
Note:
The initial password is "0000". When changing
the password for the first time, enter "0000" as
the old password.
New Pass
[Change Password]
OKCancel
SetBK
1
Old Pass
Retry Pass
[Change Password]
OKCancel
SetBK
1
Old Pass
Retry Pass
****
New Pass
Note:
A maximum of 32 digits (0-9, * and #) can be set
as a password.
Note:
When the password entry ends in failure, the fol-
lowing error message is issued. In that case,
press OK soft key and try again.
[Change Password]
OKCancel
SetBK
1
Old Pass
****
New Pass
Retry Pass
****
[Password]
OK
1
Complete
[Password]
OK
1
Password Error