NEC DTZ-24D-3 - To Originate a Call Using Speed Calling - Station;Group; To Originate a Call Using Speed Calling - System

126
TO ORIGINATE A CALL USING
SPEED CALLING - STATION/GROUP
STEP 1: Press (Redial) key.
STEP 2: Press the desired speed calling number.
TO ORIGINATE A CALL USING
SPEED CALLING - SYSTEM
To Program Speed Calling – System Key
(On One-Touch Speed Calling Key)
STEP 1: Press key.
STEP 2: Press the desired One-Touch Speed Call-
ing key. The LCD displays previously stored
digits.
STEP 3: Dial the “Speed Calling – System” access
code and the abbreviated call code.
STEP 4: Press key again.
Note:
When Redial feature is enabled at installation,
Last Number Redial feature and Speed Calling
features using (Redial) key are not available.
For details, contact the system administrator.
DT830
DT430/410
XXXXXX
LNR[ ]/SPD[_ _] –X
Mic PickUp CF-All >>>
DT830
DT430/410
Feature
Feature
SPEED SET
1:25 PM MON 11 MAY 2015