NEC DTZ-24D-3 - Page 55

46
• TO ENABLE/DISABLE RTP ALARM
The procedure below shows how to enable/disable
RTP alarm.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 3: Select Talk.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 4: Select RTP Alarm.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu

User Setting
2
2
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
OKBack

Security
Incoming Call
Talk

Usability
1
1
1
2
[Talk]
3
4
5
OKBack

DTMF Tone
Key Touch Tone
Hold Music
Prefix
RTP Alarm