NEC DTZ-8LD-3 - Paging Transfer

156
STEP 2: When Station A goes off-hook, they are con-
nected.
PAGING TRANSFER
Example:
Station A receives an important call for Station B who is
not at a desk. Station A can page Station B. When
Station B dials the Paging answer code, Station A can
announce the call and transfer it to Station B.
Station A Paging
STEP 1: Ask calling party to hold.
STEP 2: Press key. Receive an interrupted
dial tone.
STEP 3: Dial “Paging” access code. Receive a contin-
uous ringback for one second.
STEP 4: Page Station B.
STEP 5: Remain off-hook or hang-up.
To Answer (Station B)
If Station A remained off hook
STEP 1: Station B dials “Paging” answer code, and is
connected with Station A. Station A announc-
es call.
STEP 2: Station A hangs up. Station B and the calling
party are connected.
Note:
Paging function can not be supported with IP
enabled DT830 Series.
DT830
DT430/410
Calling trunk
number
TRANSFER DDD 3
1:25 PM MON 11 MAY 2015
Transfer
Stations A and B each display
the other’s number
TRANSFER XXXX
1:25 PM MON 11 MAY 2015
DDD 3
1:25 PM MON 11 MAY 2015