NEC DTZ-8LD-3 - Page 97

88
• TO ENABLE/DISABLE OFF-HOOK
RINGING
The procedure below shows how to enable/disable the
off-hook ringing.
STEP 1: While indicating the current time on LCD,
press
key to open the Menu screen.
Then, select Settings.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or the OK soft key.
• Press key.
STEP 2: Select Off Hook Ring.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or the OK soft key.
• Press key.
STEP 3: To disable/enable the off-hook ringing, select
Disable or Enable.
Select an item by either of the following operations.
• Highlight an item by using , and then press or
the OK soft key.
• Press or key, and then press or the OK
soft key.
Menu
3
3
1
2
[Menu]
3
OKBack
Directory
Call History
Settings
2
2
Note:
Default setting is Enable.
Note:
The enabled item is highlighted.
1
2
[Settings]
3
OKBack
Back Light
4
5
Headset
Peripherals
Ring Volume
Off Hook Ring
1
2
1
2
Back OK
[Offhook Ring]
Disable
1
2
Enable
2