Need help?Do you have a question about the NEC E705 and is the answer not in the manual?
General| Panel life | - h |
|---|---|
| Panel type | UV2A |
| Response time | 8 ms |
| Display diagonal | 70 \ |
| Display brightness | 400 cd/m² |
| Display technology | LED |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 31.5 - 91.1 kHz |
| LED backlighting type | Edge-LED |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Contrast ratio (dynamic) | - |
| Contrast ratio (typical) | 4000:1 |
| Display diagonal (metric) | 178 cm |
| Active display area (W x H) | 1539 x 866 mm |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA) |
| PC in (D-Sub) | Yes |
| Annual energy consumption | 213 kWh |
| Operating hours (hours/days) | 12/7 |
| RMS rated power | 20 W |
| Number of built-in speakers | 2 |
| DVI-D ports quantity | 1 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Product color | Black |
| Product design | Digital signage flat panel |
| Bezel width (bottom) | 23 mm |
| Panel mounting interface | 400 x 400 mm |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 146 W |
| Certification | C-tick; CE; FCC Class B; PSB; TÜV GS; UL/C-UL or CSA; VCCI |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Cables included | AC, DVI |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth | 87 mm |
|---|---|
| Width | 1587 mm |
| Height | 920 mm |
| Weight | 47000 g |
Details regulatory compliance with FCC standards and related information.
Outlines the terms of GPL and LGPL software licenses included with the product.
Critical safety warnings and cautions to prevent hazards during operation and handling.
Instructions on proper power cord selection and product usage environment.
Notice regarding potential radio interference in domestic environments.
Comprehensive safety measures for monitor setup, operation, and handling to prevent injury or damage.
Recommendations for ergonomic setup and usage for enhanced performance and comfort.
Guidelines for cleaning the LCD panel and monitor cabinet safely and effectively.
Advice on selecting a suitable mounting location and general installation considerations.
Specific instructions and requirements for mounting the monitor on a ceiling.
Recommendations for regularly checking the mounting apparatus for stability and damage.
Instructions for attaching eyebolts and mounting brackets to the monitor.
Guidance on installing optional accessory boards and the tabletop stand.
Ensuring adequate airflow when mounting in enclosed spaces.
Methods to secure the monitor to a wall to prevent accidental falls.
Detailed explanation of each button on the monitor's control panel.
Description of the remote control sensor and the status indicated by the power LED.
Function of the ambient light sensor and how to activate/deactivate control lock.
Overview of all available input and output ports on the terminal panel.
Details on service port, RS-232C, LAN, and other control interfaces.
Comprehensive guide to the functions of each button on the wireless remote control.
Explanation of buttons used for adjusting picture mode and aspect ratio.
How to use buttons for volume, Picture-in-Picture, and image flipping.
Information on the effective range and environmental conditions for remote control operation.
Precautions and advice for handling the remote control to ensure longevity.
Steps for selecting an installation site and installing remote control batteries.
Guidance on connecting external devices and the power cord to the monitor.
Sequence for powering on the monitor and connected devices.
Instructions for adjusting audio levels, screen position, and image quality settings.
Tips for optimizing image quality and reducing image persistence.
Important notes and precautions before making cable connections.
Visual guide to connections and a table detailing terminal usage for different equipment.
Information on connecting a PC, including resolution and timing.
Instructions for connecting DVD players and computers via HDMI and DisplayPort.
Explanation of monitor power states and the corresponding LED indicator.
Visual guide showing the recommended operating range for the remote control.
Understanding the power indicator lights and initial setup prompts.
How the IPM system saves energy by reducing power consumption when idle.
Guide to adjusting the image aspect ratio for optimal display.
How to access and interpret the Information On-Screen Display.
Explanation of different picture modes and how to select them.
Instructions on how to navigate and use the On-Screen Display menus.
Detailed descriptions of fundamental picture adjustment settings.
Further picture settings including gamma correction and movie modes.
Settings for adjusting image position, clock, and automatic setup.
Advanced picture adjustments like phase, resolution, and aspect ratio.
How to flip images and rotate the OSD display direction.
Adjusting audio output levels, balance, and treble frequencies.
Further audio adjustments including bass, surround sound, and audio delay.
Setting up timed operations for the monitor, including schedules.
Configuring PIP mode, size, position, and aspect ratio.
Customizing Picture-in-Picture and Text Ticker displays.
Adjusting OSD appearance, timing, and accessing monitor information.
Setting up monitor ID numbers for multi-display configurations.
Configuring monitor information display, OSD transparency, and input naming.
Setting up the monitor's IP address and network parameters.
Detailed configuration of IP settings, subnet mask, gateway, and DNS.
Selecting methods for automatic input source detection.
Configuring input signal priority and the speed of input signal switching.
Settings for automatic backlight dimming based on ambient light.
Utilizing the room light sensor to automatically adjust brightness levels.
Information on Human Sensing and Intelli. Wireless Data features.
Programming the monitor to power on/off at specific times.
Methods to avoid image persistence and image sticking for LCD longevity.
Tips for extending the life of the monitor, especially in public display applications.
How to use Remote Control ID mode to manage multiple monitors individually.
Step-by-step instructions for setting and resetting Remote Control IDs.
Functions controllable via RS-232C serial communication.
Details on connecting via RS-232C and the required interface protocol.
Steps for establishing a network connection using a LAN cable.
Accessing and configuring network settings through a web browser.
Pre-operation steps for network connectivity, including LAN cable connection.
Using hostnames or IP addresses to access monitor configuration pages.
Controlling the monitor's remote functions and OSD via the network.
Setting the monitor's IP address and subnet mask for network communication.
Configuring DNS server addresses and the default gateway.
Setting up email alerts for monitor status messages and errors.
Configuring sender and recipient email addresses for notifications.
A list of error codes, their explanations, and suggested measures.
Examples of alert emails received for temperature anomalies and test messages.
Configuring SNMP version, community names, and trap settings for network monitoring.
Mapping SNMP trap error codes to specific monitor events.
Enabling AMX beacon for device discovery within AMX NetLinx systems.
Configuring Crestron RoomView and controller settings for network management.
Setting the monitor's name and hostname for network identification.
Setting passwords for PJLink and HTTP server access for security.
Defining the title and message content for monitor memos.
Configuring password protection for memo features.
Step-by-step guide on using the Point Zoom function to enlarge specific image areas.
Important notes regarding image distortion, function limitations, and release conditions.
Highlighting features like Reduced Footprint, OmniColor, and sRGB for superior image quality.
Features such as OSD, Plug and Play, IPM, VESA mounting, DVI, and HDCP.
Information on compliance with VESA, DVI, HDCP standards and the use of option boards.
Solutions for issues related to no image display or power not responding.
Addressing problems like snowy picture, image persistence, and instability.
Troubleshooting Y/Pb/Pr input signals and the monitor's LED indicator status.
Diagnosing blinking red LEDs and issues with image sizing or resolution display.
Solutions for problems like no sound output or non-functional remote control.
Troubleshooting schedule/timer functions and TV interference.
Resolving issues with RS-232C, LAN control, and network connectivity.
Technical details of the LCD module, resolution, color depth, and frequency range.
Supported input signals, connectors, and signal compatibility for the E705 model.
Audio output, control interfaces, power supply, and operational environment details.
Storage conditions, dimensions, weight, mounting, and included accessories.
Technical details of the E805 LCD module and its input signal compatibility.
Technical details of the E805 LCD module, resolution, frequency, and input signals.
Audio output, control interfaces, power supply, and environmental operating conditions for E805.
Technical details of the E905 LCD module, resolution, color, and frequency range.
Supported input signals, connectors, and signal compatibility for the E905 model.
Pinout details for the analog multi-input connectors (Mini D-sub 15-pin).
Pinout details for the RS-232C serial control input connector (D-Sub 9-pin).
Information on environmentally responsible disposal and recycling of NEC products.
Details on the monitor's energy saving modes and their power consumption.
Specific regulations within the European Union regarding the disposal of used batteries.
To Next Page
