NEC Display Solutions of America, Inc.
E805 Installation Guide
80” LCD Display Rev 1.0
www.necdisplay.com E805 Page 11 of 11
Browser Control
Information and control can also be available through the HTTP browser control menu.
In order to accomplish this, type: http://<the Monitor’s IP address>/pd_index.html
Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off.
All displays are set to the IP address 192.168.0.10 out of the box
Communicating network PC needs to be on the same subnet as display that is being communicated with
NOTE:
Menus on the left side of the above screenshot can be altered to control the display
Menu above is consistent with the E805 even though it states P553 on top
To Previous Page
Loading...
