NEC E805 User Manual

NEC Display Solutions of America, Inc.
E805 Installation Guide
80” LCD Display Rev 1.0
www.necdisplay.com E805 Page 1 of 11
Contents:
Product Description and Notes Page 1
Tilt Angle and Rotation
Page 1
Ventilation Recommendations
Page 2
Display Dimensions
Page 3-4
Display Dimensions with stand
Page 5
Optional Table Top Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7-8
Dimensions of Optional Wall Mount (WMK-3257)
Page 9
Input Terminals
Page 10
Control Codes
Page 10
Browser Control
Page 11
Product Description:
Type: LCD Display
Resolution: 1920 x 1080 Dimensions without stand: 72.3” (W) x 41.8” (H) x 3.4” (D)
Aspect Ratio: 16:9 Dimensions with stand: 72.3”(W) x 43.3”(H) x 23.9”(D)
FCC: Class B Weight without stand: 132.3 lbs
Power Consumption: 230W (typ) Weight with stand: 142.5 lbs
BTU’s: 784.79 BTU/hour
NOTES:
 This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
 Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
 Distances are in inches, for millimeters multiply by 25.4.
 Distances may vary ±5%.
Tilt Angle and Rotation:
 Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
MAXIMUM TILT ANGLE

NEC E805 Specifications

General

Panel life	- h
Panel type	UV2A
Display diagonal	80 \
Display brightness	400 cd/m²
Display technology	LED
Vertical scan range	50 - 85 Hz
Horizontal scan range	31.5 - 91.1 kHz
LED backlighting type	Edge-LED
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Contrast ratio (dynamic)	-
Display diagonal (metric)	203.22 cm
Active display area (W x H)	1771 x 996 mm
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1360 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
PC in (D-Sub)	Yes
Annual energy consumption	314 kWh
Operating hours (hours/days)	12/7
RMS rated power	20 W
Number of built-in speakers	2
DVI-D ports quantity	1
Ethernet LAN data rates	100 Mbit/s
Product color	Black
Product design	Digital signage flat panel
Bezel width (bottom)	29.7 mm
Panel mounting interface	400 x 400 mm
Power consumption (standby)	1 W
Power consumption (typical)	215 W
Certification	C-tick; CE; FCC Class B; PSB; TÜV GS; UL/C-UL or CSA; VCCI
Sustainability certificates	RoHS
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, DVI

Weight and Dimensions

Depth	87 mm
Width	1836 mm
Height	1061 mm
Weight	61000 g

Summary

Product Description

Product Specifications

Key technical specifications including resolution, aspect ratio, power, and dimensions.

Ventilation Recommendations

Ventilation Space Requirements

Details the minimum required clearance for proper ventilation around the display.

Display Dimensions

Display Unit Dimensions

Rear Mounting Dimensions

Display Dimensions (with ST-801 stand)

ST-801 Stand Dimensions

Dimensions with Optional Wall Mount Kit (WMK-3257)

WMK-3257 Mounting Dimensions

Control Codes

RS-232C Control Codes

Lists specific hex code data for controlling monitor functions via RS-232C.

Cable Connection

RS-232C Communication Protocol

Ethernet Communication Protocol

Browser Control

HTTP Browser Control Access

Explains how to access and use the HTTP browser interface for remote control.