C ALLBACK R EQUEST
SET ANSWER
When calling a busy or unanswered Receive display and/or Feature
multiline telephone: LED message indication:
➤ Dial Callback Request code #
. ➤ Lift handset.
➤ Replace handset. ➤ Dial #
: request originator is
automatically called.
➤ Repeat above procedure to respond
to additional messages.
NOTE: Callback messages are automatically cancelled once the originating station is called.
T ONE O VERRIDE
SET ANSWER
When calling a busy multiline telephone: With a call in progress:
➤ Dial Tone Override code
* to send tone. ➤ Receive tone override signal.
*
➤ Wait for signalled party to answer. ➤ Press Hold.
➤ Converse with second party.
* If handsfree, a visual indication only (*) will be provided on the telephone’s display.
NOTE: An Override Tone will be sent each time * is pressed.
S TEP C ALL
When calling a busy telephone:
➤ Dial 2
to advance to the next station number in that 10’s group.
V OICE O VER
ORIGINATE
When calling a busy telephone:
➤ Dial Voice Over code 6
.
➤ Announce message.
ANSWER
With a call in progress:
➤ Receive Voice Over announcement.
➤ Press Hold.
➤ Converse with Voice Over originator.
➤ Press Answer key to alternate
between parties.
NOTE: The Whisper Page Access Code may be assigned to a Feature Access key or One Touch key.
8
WHISPER PAGE
With a call in progress:
➤ Receive Voice Over announcement.
➤ Press Feature.
➤ Dial 65
.
➤ Converse with Voice Over originator
while monitoring first call.
➤ Press Feature.
➤ Dial 65
.
➤ Converse with first caller while
monitoring Voice Over originator.
To Next Page
Loading...
