2
G
eneral Information
The following should be considered when reviewing this User Guide:
➤ All operational instructions assume Prime Line Pickup is assigned to intercom
dial tone, Ringing Line Preference is assigned to all telephones, a Line and
Second Incoming Extension key has been assigned to all multiline telephones
and only a single tenant has been assigned in the system.
➤ All access codes listed are standard; some may vary based on system assignment.
➤ Access to many features is based on system assignments. Not all features may
be available from your telephone.
➤ Telephones equipped with displays will provide useful call processing
information such as digits dialed, recall indications, feature confirmation, etc.
LED INDICATIONS
FUNCTION LAMP STATUS
CO LINE KEYS:
Incoming Call Rapid Flashing Red
Held Call - Your Telephone Slow Flashing Green
Held Call - Other Telephone Slow Flashing Red
Call in Progress
Your Telephone Steady Green
Other Telephone Steady Red
Hold Recall Intermittent Flashing Green
LARGE LED:
Incoming CO/PBX, DIT or ANA Call Rapid Flashing Green
Incoming Intercom, TIE Line or DID Call Rapid Flashing Red
Message from Attendant Slow Flashing Green
Voice Mail Message Slow Flashing Red
Feature KEY:
DND Set Intermittent Flashing Red
Call Forward Set Intermittent Flashing Red
Callback Request Slow Flashing Red
ICM LED:
Incoming Call Flashing Red
Call in Progress Steady Red
Held Call Flashing Red Conf LED
To Next Page
Loading...
