*1 : System Configuration > BIOS/Platform Configuration(RBSU) > PCIe Device Configuration >
Advanced PCIe Configuration > PCIe MCTP Options
*2 :
*3 :
● About set value of Extended Memory Test option
When System ROM Version is v2.36 (07/16/2020), Extended Memory Test option is set to "Disabled" automatically after a
system reboot.
S
stem Confi
uration > BIOS/Platform Confi
uration
RBSU
> Memor
Options > Extended Memor
Tes
3) Notice about the function of the iLO5
● Caution about Reset iLO
Do NOT Reset iLO during the period from server boot start to the completion of OS boot. This period includes the execution
of POST (Power On Self Test)
Do NOT Reset iLO while users are using the System Utilities.
Under such circumstances, restarting the iLO may cause unexpected result.
For example, while changing options of the System Utilities, Reset iLO may lead to loss of server settings such as Serial
number and Product ID. If the iLO is reset during POST execution, the screen display of UUID and UUID logic in iLO Web
Interface : [Information] - [Overview], may be corrupted. Please turn off and turn on the power this product.
iLO Resets which is subject to this caution
- Reset iLO via network such as iLO Web interface
- Reset iLO via UID switch
* Refer to Caution for operating “BMC Configuration Utility” in the System Utilities below, for the cases where iLO is reset
after changing the settings in “BMC Configuration Utility” in the System Utilities.
● Caution about iLO time function
This caution is for iLO firmware version lower than 1.45.
In case that SNTP setting is disabled, and if the iLO is reset, iLO time may be slipped.
It is recommended that SNTP is set enabled at iLO Web interface.
For the details of iL
SNTP settin
, please refer to iLO5 User’s Guide.
To Next Page
Loading...
