Need help?Do you have a question about the NEC Express5800 120Ld and is the answer not in the manual?
General| CPU | Intel Xeon |
|---|---|
| Memory Slots | 6 |
| RAID Support | RAID 0, 1, 5 |
| Expansion Slots | 6 |
| Network | Dual Gigabit Ethernet |
| Power Supply | Redundant |
| Processor | Intel Xeon |
| Operating System Support | Windows Server, Linux |
Explains text formatting, warnings, cautions, and notes used in the manual.
Provides critical safety warnings for operating and handling the system.
Outlines best practices for protecting the system from environmental hazards.
Provides a high-level overview of the server's architecture and primary components.
Details the physical structure of the server chassis and its bays.
Describes the major functional elements of the system board.
Explains the IDE, SCSI, LAN, and other I/O controllers and ports.
Covers BMC, ACPI, Wake-on-LAN, and system security functions.
Guides on choosing an appropriate location and safely unpacking the server.
Provides instructions for installing the server into a standard rack cabinet.
Introduces front/rear views, controls, and indicators for user orientation.
Details how to connect peripherals and power cords for system setup.
Explains how to access and use the BIOS for system configuration.
Details the use of the Adaptec utility for SCSI device configuration.
Covers settings and options for configuring the RAID controller.
Describes jumper settings for system board configuration parameters.
Covers essential preparation, tools, and safety for system upgrades.
Step-by-step guides for replacing/installing components like CPU, DIMMs, drives.
Instructions for installing and removing PCI and ISA expansion boards.
Procedures for installing or swapping SCSI hard disk drives.
Provides systematic checks for common startup and operational issues.
Outlines detailed steps for diagnosing system problems.
Lists common issues and their specific solutions.
Explains POST error codes and messages for troubleshooting.
Details cabling for the standard IDE and SCSI controller setup.
Introduces MWA and its system requirements for remote management.
Guides on installing MWA and configuring server settings.
Explains MWA interface, toolbar, and key functions like remote console.
Describes various dialog boxes used within the MWA interface.
Provides solutions for common problems encountered with MWA.
Explains how software monitors hardware status items.
Provides definitions for technical terms used in the manual.
Instructions on how to use the equipment log to record system details.
To Next Page