3-18
Configuring Your System
Table 3-1. Adaptec SCSI Utility Setup Configurations (Continued)
OPTION
RECOMMENDED SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
Display <Ctrl-A> Messages During BIOS
Initialization
Enabled
Extended BIOS Translation for DOS
Drives >1 GByte
Enabled
Verbose/Silent Mode Verbose
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Enabled
1
Domain Validation Enabled
Support Removable Disks
Under BIOS as Fixed Disks
Disabled
1, 2
BIOS Support for Int13 Extensions Enabled
1
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.
Exiting Adaptec SCSI Utility
To exit the Adaptec SCSI Utility, press ESC until a message prompts you to exit
(if you changed any settings, you are prompted to save the changes before you
exit).
To Next Page
Loading...
