EasyManua.ls Logo

NEC Express5800 120Ld - I;O Expansion Slots

NEC Express5800 120Ld
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Overview 1-9
I/O Expansion Slots
The server's expansion capabilities meet the needs of file and application servers for
high performance I/O by providing a combination of PCI and ISA expansion slots.
The system board has two 66 MHz PCI connector slots (Figure 1-6, A) that can
accommodate either a 32 or 64 bit PCI card and one 33 MHz PCI connector slot (Figure
1-6, B) that can accommodate either a 32 or 64 bit PCI card. The top two PCI connector
slots (PCI 1 and PCI 2) support bus speeds up to 66 MHz. The third connector slot
(PCI 3) supports a bus speed of up to 33 MHz.
Note:
The bus speed for the two 66 MHz PCI connector slots
(PCI 1 or PCI 2) is decreased to 33 MHz if a PCI card is installed into
connector slot PCI 3 or if a 33 MHz PCI card is installed into any one
of the two 66 MHz PCI connector slots.
PCI features:
!
Bus speed up to 66 MHz (PCI 1 and PCI 2)
!
Bus speed up to 33 Mhz (PCI 3)
!
32-bit memory addressing
!
5 V/3.3 V signaling environment
!
Burst transfers up to a peak of 264 MB/s (64 bit, 33 MHz PCI) and 528 MB/s
(64 bit, 66 MHz PCI)
!
8-, 16-, 32-, or 64-bit data transfers
!
Plug and Play ready
!
Parity enabled.
A
B
Figure 1-6. 64 Bit PCI Connector Slots

Table of Contents

Related product manuals