To Next PageTo Next Page
Need help?Do you have a question about the NEC Express5800/R120f-1E and is the answer not in the manual?
General| Memory Slots | 12 DIMM slots |
|---|---|
| Network Interface | 2 x Gigabit Ethernet |
| Form Factor | Rack-mountable |
| Storage | Up to 8 x 2.5" SAS/SATA HDD/SSD |
| RAID Support | RAID 0, 1, 5, 6, 10 |
| Power Supply | Redundant power supplies |
| Operating System | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server |
| Expansion Slots | 3 x PCIe 3.0 slots |
Provides an overview of the NEC Express5800 server configuration guide.
Highlights the main advantages and capabilities of the NEC Express5800/R120f-1E server.
Details processor types, memory capacities, and protection features.
Details internal storage options and available expansion slots.
Details server management features and available interface connectors.
Covers power supply options, redundancy, and consumption details.
Lists dimensions, weight, operating temperature, and regulatory information.
Lists the operating systems officially supported by the server.
Illustrates and labels the connectors and indicators on the front and rear panels.
Provides detailed measurements of the server chassis with and without management arm.
Diagram showing internal component layout and external connections.
Details PCIe riser card kits and their supported slot configurations.
Details available base server models.
Details available processor kits and required heat sinks for installation.
Details memory configuration using independent channels for different OS.
Explains memory sparing configuration for enhanced data protection.
Describes memory mirroring and lockstep configurations for data redundancy.
Specific memory configuration for Windows Server 2008 Standard.
Guides on RAID configuration based on OS and RAID controller type.
Lists components needed for RAID configuration with embedded SATA controller.
Details components for RAID 0/1 configuration with a 1GB cache controller.
Details components for RAID 5/6 configuration with a 1GB cache controller.
Lists SAS/SATA HDDs and SAS SSDs for Windows Server 2008/R2 and RHEL 6.
Lists SAS/SATA HDDs and SATA SSDs for Windows Server 2012/R2 and RHEL 7.
Lists available internal and external optical drive options.
Details PCIe riser card kits for different slot configurations.
Lists available LOM cards and network adapter options.
Explains NIC teaming support for various network interfaces and OS.
Details InfiniBand controller adapters, cables, and switches.
Describes the LSI MegaRAID SAS 9380-8e external RAID controller.
Details RAID controller compatibility and limitations with VMware ESXi versions.
Lists available Fibre Channel and SAS controller adapters.
Details the serial port adapter that connects via PCI bracket.
Lists available power supply units and notes on redundancy configuration.
Covers internal USB flash memory for ESXi and Trusted Platform Module kit.
Details the USB flash drive emulating a floppy disk.
Describes the 17-inch LCD console drawer options with and without KVM.
Details server KVM switch units and connection cables for cascading.
Details the cable management arm kit for rack mounting.
Explains the license for enhanced remote management features.
Details supported boot modes (Legacy/UEFI) and X2APIC settings for OS.
Covers hardware monitoring, event logs, and boot monitoring capabilities.
Details remote KVM, remote control via LAN, and maintenance functions.
Shows OS compatibility for embedded SATA controllers and RAID controllers.
Details OS support for network and InfiniBand adapters.
Lists PCI cards and their slot compatibility with the standard riser card.
Shows PCI cards and their slot compatibility with the PCIe x8 riser card.
Lists PCI cards and their slot compatibility with the PCIe x16 riser card.
