NEC Express5800/R120f-1E - Server Configuration: Serial Port Adapter and Other Add-in Components; Serial Port Adapter; Power Supply Options; Internal Flash Memory and TPM Kit

SYSTEM CONFIGURATION GUIDE – NEC Express5800R120f-1E
NEC Corporation Revision 6.0 – July 16, 2015 24
6.5 Serial Port Adapter
Product Name / Description
Part Number
Serial Port Adapter
Serial port fixed to PCI bracket
N8117-01A
NOTE:
 Up to one Serial Port Adapter can be installed.
7 Other Add-in Components
7.1 Power Supply
Product Name / Description
Part Number
460W Hot Plug Power Supply
1 x 460 Watt 80 PLUS® Platinum
N8181-121F
800W Hot Plug Power Supply
1 x 800 Watt 80 PLUS® Platinum
N8181-122F
800W Hot Plug Power Supply
1 x 800 Watt 80 PLUS® Titanium
NOTE: 200 VAC input only supported
N8181-118F
NOTE:
 The power units must be the same to configure redundancy.
7.2 Internal Flash Memory
Product Name / Description
Part Number
VMware ESXi support kit
Internal USB flash memory to install VMware ESXi system
N8106-009
NOTE:
 The kit does not include VMware ESXi installation media and license.
7.3 Trusted Platform Module Kit
Product Name / Description
Part Number
Trusted Platform Module Kit
TPM 1.2 module
N8115-21
NOTE:
 The kit is not available in China.
 The kit is not removable after attachment.
 "TPM Support" in BIOS setup menu must be activated prior to use of this product.
 To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker
function. The recovery password is required to restore data for hardware replacement during a
system error.
7.4 Flash FDD
Choose the Flash FDD if you need to prepare an alternative device for a floppy drive.
Category
Product Name / Description
Part Number
External
Flash FDD
USB flash emulating USB floppy disk, Native capacity 1.44 MB
N8160-96
NOTE:
 Up to one drive can be connected.