NEC ITK-12D-1P - TERMINAL SETUP

TERMINAL SETUP
23
TERMINAL SETUP
This chapter describes operating procedures for terminal settings
with the UP/DOWN key, the Feature key and the Menu key.
Various terminal settings such as display, sounds, password, and
language are also available from the Menu key.
SETUP WITH UP/DOWN KEY
TO ADJUST HANDSET RECEIVER
VOLUME
Press the UP/DOWN key in the off-hook status or during the call.
TO ADJUST SPEAKER VOLUME
Press the UP/DOWN key during speaker phone operation or
during the call.
TO ADJUST RINGER TONE
Press the UP/DOWN key during ringing.
TO ADJUST LCD CONTRAST
Press the UP/DOWN key in the on-hook status.
For details of configuration setting, please contact the
system administrator.
SETUP WITH FEATURE KEY
The available key operations the Feature key + digit keys for DT
terminals are as listed below.
Feature + 0 =Volume adjustment of a ringer.
Feature + 1 =Selects microphone on or off
Feature + 3 =Selects ringer tone.
MICROPHONE ON/OFF
LED on the Mic key shows the status of the built-in microphone.
1. Press the soft key associated with the MIC on the
LCD or press the Feature key and [1] key.
TO SELECT RINGER TONE
The terminal have 10 kinds of ringer tones that you can select.
1. Press the Feature key and [3] key. The LCD
displays the selected tone number (n=1 ~ 13).
No.
Frequency（Hz）
Modulation（Hz）
1
520/660
16
2
520/660
8
3
1100/1400
16
4
1100
5
540
6
1400/1100 Door Phone
7
660/760
8
1100 Envelop
9
Door Phone Melody
Melody 1
Melody 2
Melody 3
Melody 1
10
Melody4
Melody5
11
C-Major Scale Ring tone
12
Kanon
13
Turkish March
The tone number 5, 6, and 8~13 sound continuously.