NEC ITK-6DG-1A - Double Height Characters on Lcd

FEATURE OPERATION
69
INCOMING CALL HISTORY
TO VIEW INCOMING CALL
HISTORY
There are following way to display incoming call history.
DISPLAYING INCOMING CALL HISTORY
BY PRESSING SOFT KEY (HIST.).
1. Press Soft key (HIST.).
Speaker key lamp lights red.
2. Press Soft key (IC).
The history of the last incoming call is displayed.
3. Display the target incoming call history.
Select one of the following operations.
 Press Up/Down key.
 Press Soft key (↑Prev) or Soft key (↓Next).
TO MAKE A CALL FROM
INCOMING CALL HISTORY
You can make a call using the Incoming call history.
1. Refer to TO VIEW INCOMING CALL HISTORY and
display the incoming call history.
2. Make a call
Select one of the following operations.
 Lift the handset and press Soft key (CB).
 Press Soft key (CB) to make a handsfree call.
3. Make a call to the target party in the incoming call
history.
TO DELETE INCOMING CALL
HISTORY
Following explains how to delete one incoming call history data.
1. Refer to TO VIEW INCOMING CALL HISTORY and
display the incoming call history of the number
you want to delete.
2. Display the incoming call history of the number
you want to delete.
Select one of the following operations.
 Press Up/Down key.
 Press Soft key (↑Prev) or Soft key (↓Next).
3. Press Left key or Soft key (<<<<).
4. Press soft key (Del).
5. To end the operation after deleting the incoming
call history, press Speaker key.
Speaker lamp goes off.
ADD INCOMING CALL HISTORY TO
STATION SPEED DIALING
Following explains how to register an incoming call history data
to station speed dialing.
1. Refer to TO VIEW INCOMING CALL HISTORY and
display the incoming call history of the number
you want to register.
2. Display the incoming call history of the number
you want to register.
Select one of the following operations.
 Press Up/Down key.
 Press Soft key (↑Prev) or Soft key (↓Next).
3. Press Left key or Soft key (<<<<).
4. Press Soft key (Entry).
DOUBLE HEIGHT CHARACTERS
ON LCD
One of the four lines in the LCD can be displayed in double
height size. While one line is being displayed in double height
size, one of the other lines disappears.
The feature keys is allowed by system data
setting at initial installation. For details, please
contact the system administrator.
TO CHANGE OF THE TARGET LINE TO
BE DISPLAYED IN DOUBLE HEIGHT
SIZE
Normal Indication
MARY SMITH [200]
4:26 PM MON 1 JULY 2019
MIC DIR HIST. >>>>
(1) The first line
(2) The second line
(3) The third line
(4) The fourth line
(1)
(2)
(3)
(4)