NEC ITZ-24D-3 - Page 59

50
STEP 5: Select Automatic, No Tone, Tone
or Voice.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press or the OK soft key.
• Press - key, and then press or the OK
soft key.
• TO SET MUSIC ON HOLD
The procedure below shows how to set Music on Hold
to be heard by the terminal user.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
Note:
When Automatic is set, the default setting
(Tone) is applied.
Note:
The enabled item is highlighted.
0
1
2
3
0
3
0
1
[Key Touch Tone]
2
OK
Back
No Tone

Tone
Automatic
3
Voice
0
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu

User Setting