EasyManua.ls Logo

NEC MD205MG-1 - Specifications

NEC MD205MG-1
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English.9
English
Specifications
Display Specifications MD205MG-1 Display Notes
LCD Module Diagonal: 51.0 cm/20.1 inches Active matrix; thin film transistor (TFT) liquid
Viewable Image Size: 51.0 cm/20.1 inches crystal display (LCD); 0.156 mm dot pitch;
Native Resolution (Pixel Count): 2048 x 2560 (Portrait) 400 cd/m
2
calibrated white luminance;
2560 x 2048 (Landscape) 600:1 contrast ratio, typical.
Input Signal Video: Digital Input: DVI VideoDot Clock 320Mhz Max (Dual link)
VideoDot Clock 160Mhz Max (Single link)
Grayscale Tones 10 Bit: 1024 (10bit) shades of gray from
When used with an recommended
a pallet of 3061 (11.5bit)
10 bit
display card
8 Bit: 256 (8bit) shades of gray from a When used with an recommended
pallet of 3061 (11.5 bit) 8 bit display card
Input signal timing Horizontal: 119 kHz
Vertical: 57.7 Hz
Viewing Angle Left/Right: ±85° (CR > 10)
Up/Down: ±85° (CR > 10)
Image Formation Time 30 ms (Typ.)
Active Display Area Portrait: Horiz.: 319 mm/12.6 inches
Vert.: 399 mm/15.7 inches
Landscape: Horiz.: 399 mm/15.7 inches
Vert.: 319 mm/12.6 inches
Power Supply AC 100-240V ~ 50/60Hz
Current Rating 3 - 1.5 A
Dimensions Portrait: 379.6 mm (W) x 512.7 - 632.7 mm (H) x 247.3 mm (D)
14.9 inches (W) x 20.9 - 24.9 inches (H) x 9.7 inches (D)
Landscape: 474.3 mm (W) x 465.3 - 585.3 mm (H) x 247.3 mm (D)
18.7 inches (W) x 18.3 - 23.0 inches (H) x 9.7 inches (D)
Height Adjustment: 120 mm/4.72 inches
Weight 9.8 kg/21.6 lbs
Environmental Considerations
Operating Temperature: 10°C to 40°C/50°F to 104°F
Humidity: 30% to 75% (without condensation)
Feet: 0 to 10,000 Feet/0 to 3,048 m
Storage Temperature (in package): -10°C to 60°C/14°F to 140°F
Humidity (in package): 10% to 85% (without condensation)
Feet (in package): 0 to 40,000 Feet/0 to 12,192 m
UL-Classification
According to the type of protection against electric shock: CLASS I
According to the degree of protection against electric shock: No Patient connection
According to the degree of protection against ingress of water as detailed in the current edition of IEC529: No Protection
According to the method of sterilization or disinfection recommended by the manufacturer: Not Specified
According to the degree of safety of application in the presence of a FLAMMABLE AN AESTHETIC MIXTURE WITH AIR or a WITH
OXYGEN OR NITROUS OXIDE: Not suitable
According to the mode of operation: Continuous operation
01_MD205MG-1_INSTALL_EN.P65 7/5/08, 10:09 AM9

Related product manuals