Safety Precautions, Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING
• DO NOT OPEN THE MONITOR. There are no user serviceable parts
inside and opening or removing covers may expose you to dangerous
personnel.
• Do not bend, crimp or otherwise damage the power cord.
• Do not place any heavy objects on the power cord.
• Fasten the power cord to the monitor by attaching the screw and clamp to
• Please make sure that enough power is supplied to the monitor. Please
• The power supply cord you use must have been approved by and comply
mm
2
should be used in Europe).
•
black (5 A) fuse installed for use with this monitor.
• The power cable connector is the primary means of detaching the system
from the power supply. The monitor should be installed close to a power
outlet that is easily accessible.
• Do not spill any liquids into the cabinet or use your monitor near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal, or may cause
• Do not place this product on a sloping or unstable cart, stand or table, as
the monitor may fall, causing serious damage to the monitor.
• Do not mount this product face up, face down, or upside down for an
extended period of time as it may cause permanent damage to the screen.
• Do not use the monitor outdoors.
• If glass is broken, handle with care.
• This monitor is equipped with temperature control fans. For reliable
performance and long life use of this product, it is required that the vents
on the monitor are not covered.
• If the monitor or glass is broken, do not come in contact with the liquid
crystal and handle with care.
BT421_setup.indb 4 2019/06/14 12:47:18
To Next Page
Loading...
