English−19
English
4. Please check that you can still rotate, raise and lower the monitor screen after you have installed the cables ( and
).
Power Cord
DisplayPort Cable
DisplayPort Cable
Power Cord
5. Connect the power cord to a power outlet.
Please refer to the Caution section of this manual for proper selection of the AC power cord (see page 9).
Please make sure that enough power is supplied to the monitor. Please refer to “Power Supply” in the
“Chapter 4 Specications” on page 32.
6. Turn on the monitor by pressing the ⏻ button and then turn on the computer. Please make sure the LED on the front of the
monitor is lit.
If you have any problems please refer to the Troubleshooting section of this User’s Manual (see page 28).
To Next Page
Loading...
