English−31
English
• When applying 1000 Mbps communication, please use a compatible LAN cable.
• Make sure a computer is connected to the monitor with a USB-C cable.
• Make sure the LED lights up when connecting a LAN cable to the monitor.
• Please refer to the Terminal Panel (see page 14) for information about the LAN port’s LEDs states.
• Check if [USB Functionality] is set to [Auto] or [On].
• Check if [USB LAN] is set to [On].
• Make sure the driver is installed.
• Depending on the computer or OS, a manual driver installation may be needed. For the latest driver update, please visit
ASIX website and download desired le from “AX88179A Software and Tools”.
To Next Page
Loading...
