English - 12
4. Connect the supplied power cord
Screw
Clamp
5. Cable information
CAUTION Use the provided specied cables with this product so as not to interfere with radio and television reception.
For mini D-Sub 15-pin and USB, use shielded signal cables with ferrite core.
For the HDMI and AV cables, use shielded signal cables.
The use of other types of cables and adapters may cause reception problems.
6. Turn the power button on
Switch on the monitor power before turning the computer or external equipment on.
7. Operate the connected external equipment
Select the input source for the monitor to display the video from the external equipment on the screen.
8. Adjust the sound
Make volume adjustments when required.
9. Adjust the picture settings
When using an HDMI input terminal, select the appropriate setting between [Mode 0], [Mode 1], and [Mode 2] in [EDID]
under [HDMI Settings] in the [Setup] OSD menu.
To Next Page
Loading...
Need help?
General