NEC MultiSync E868 User Manual

English - 74
Setup
VGA Options This option is only enabled when a VGA signal is input.
VGA Mode Select [RGB] or [YPbPr] depending on the signal received into the VGA input terminal.
Auto Adjust Automatically adjusts settings such as the image position.
H.Position Adjusts the horizontal position of the screen.
Press the
u
button to move the screen to the right or the
t
button to move it to the left.
V.Position Adjusts the vertical position of the screen.
Press the
u
button to move the screen to the top or the
t
button to move it to the bottom.
Clock Adjust this setting when vertical lines appear on the screen or when the size differs at the right
and left of the screen.
Phase Adjust this setting when noise appears in the horizontal direction, when the characters are
blurred, or when the contours are not sharp.
H.Resolution The video can be enlarged/reduced in the horizontal direction using this function only when
[Standard] is selected in [Aspect Ratio].
NOTE This function may not operate depending on the input signal.
V.Resolution The video can be enlarged/reduced in the vertical direction using this function only when
[Standard] is selected in [Aspect Ratio].
NOTE This function may not operate depending on the input signal.
Reset VGA Options Resets the VGA Options settings to their default values.
Other settings
Input Labels Renames the input terminal currently being displayed. Letters (A-Z), numbers (0-9), and some
symbols can be used.
Key Lock Settings Prevents the monitor from being controlled using the buttons on the monitor control panel.
Off
All buttons operate normally.
Mode 1
Only the power button and the input switching function operate.
Mode 2
All buttons are locked. (Only the power button can be used during standby mode.)
IR Lock Settings Prevents the monitor from being controlled using the remote control.
Off
All buttons operate normally.
Mode 1
Only the POWER and the SOURCE buttons operate.
Mode 2
All buttons are locked. (Only the power button can be used during standby mode.)
Power supply You can congure the power supply to the USB Type-C port.
The power consumption increases when set to [On].
LED Indicator Set it to Off to turn off the power indicator when the monitor is turned on (normally lit blue).
Mute Settings Allows you to mute the monitor’s audio and video output.
Audio
Mutes the audio output when the remote control’s MUTE button is pressed.
Video
Mutes the video output when the remote control’s MUTE button is pressed.
Audio & Video
Mutes the audio and video output when the remote control’s MUTE button
is pressed.
Image Rotation When [On] is selected, rotates the image 180 degree.
Thermal Management The monitor is equipped with thermal sensors and displays a warning when the ambient
temperature exceeds the operation guaranteed temperature. If a warning is displayed, turn the
monitor off since using the monitor in such environment may cause a malfunction.
Warning Message
A temperature warning is displayed on the screen when the internal
temperature has exceeded the operation guaranteed temperature.
Shutdown
The monitor turns off automatically when the internal temperature has
exceeded the operation guaranteed temperature.
Signal Information Displays the information regarding the input signal.
Monitor Information Displays the information regarding the monitor.
Factory Reset All settings except network are returned to factory default.

NEC MultiSync E868 Specifications

General

Brand	NEC
Model	MultiSync E868
Category	Monitor
Language	English