English-13
English
Controls
OSD (On-Screen Display) control keys on the front of the monitor function
as follows:
To access the OSD menu, touch any of the control keys.
To change the signal input, touch the SELECT key.
NOTE: Exit the OSD in order to change signal input.
1 Ambient Light Sensor
Human Sensor
Detects the level of ambient lighting and the presence of a user, allowing the monitor to
make adjustments to various settings resulting in a more comfortable viewing experience.
Do not cover this sensor.
2 INPUT/SELECT Enters the OSD main menu and sub menus.
Changes the input source when not in the OSD menu. You can directly change to
L/B (LOW BLUE LIGHT) mode by touching the INPUT key for 3 seconds or more.
3 MENU/EXIT Opens the OSD menu. Exits the OSD sub menus and main menu.
4 LEFT/RIGHT/
UP/DOWN*
2
Navigates through the OSD menu.
When the OSD menu is off, you can access the BRIGHTNESS sub menu by touching the
UP key, and access the VOLUME sub menu by touching the DOWN key.
5 ECO/RESET When the OSD menu is displayed on the screen, this button resets the OSD settings.
When the OSD menu is not displayed on the screen, this button switches ECO status.
You can set a mode from OFF, 1 and 2.*
1
Activates the Auto Adjust function if held for 3 seconds while the OSD menu is off
(analog input only)*
1
.
6 Power Turns the monitor on and off.
7 Power LED Indicates that the power is on or off.
*
1
When the Hot Key function is OFF, this function is disabled.
*
2
Depending on the OSD ROTATION setting, LEFT, RIGHT, UP and DOWN key guides are displayed at the , , , keys
differently (See page 18).
ECO TOOLS
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.
CONTRAST
Adjusts the overall image and background screen brightness by input signal level.
NOTE: When L/B is selected in COLOR control, CONTRAST is disabled.
To Next Page
Loading...
Need help?
General