NEC MultiSync V422 - Controlling Monitor via LAN; Connecting to a Network; Network Setting via HTTP Browser

(34/71)
Item OP
code
page
OP code Parameter Remarks
Aspect 02h 70h 0: No operate
1: Normal
2: Full
3: Wide
4: Zoom
5: (reserved)
6: Dynamic
7: Off (dot by dot)
Wide:
A/V mode only
PIP ON/OFF
Still ON/OFF
02h 72h 1: Off
2: PIP
3: POP
4: Still
5:Side by side
(aspect)
6: Side by side
(Full)
PIP Input 02h 73h 0: No mean
1: VGA
2: RGB/HV
3: DVI
4: HDMI (Set only)
5: Video1
6: Video2
7: S-Video
12(0Ch): DVD/HD1
13(0Dh): Option
14(0Eh): DVD/HD2
15(0Fh): Display
Port
17(11h): HDMI
This
operation has
limitation of
selection.
Please refer
to the
monitor
instruction
manual.
Still Capture 02h 76h 0: Off
1: Capture
Momentary
Signal Information 02h EAh 0: No Action
1: Off
(No indication)
2: On
(Indication
）
Auto Setup 00h 1Eh 1: Execute Momentary
TV-Channel UP/DOWN 00h 8Bh 0: No Action
1: Up
2: Down
This
operation
requires
supported
option TV
tuner.
Select Temperature sensor 02h 78h 1: Sensor #1
2: Sensor #2
3: Sensor #3
Temperature
sensor
Readout a temperature 02h 79h Returned value
is
2's complement.
Refer to section 6.2
Read only
Readout carbon footprint
(g)
10h 10h 0:
|
999:
Read only
Carbon
footprint
Readout carbon footprint
(kg)
10h 11h 0:
|
65535:
Read only