NEC MultiSync XG750A User Manual

24
SIGNAL ENTRY
ENTRY DATA OVERWRITE?
YES NO
SIGNAL ENTRY
NEW ENTRY
ENTRY COPY
ENTRY MOVE
ENTRY DELETE
DATA COPY
CHANGE DEFAULT
SOURCE EDIT
P01/10-1
DELETE : SELECT START LINE
STANDALONE
NO
02
03
04
05
06
07
08
09
NAME
PAL
VGA480
NTSC
SOURCE
VIDEO
RGB
S-VIDEO
INPUT
A
A
A
SIGNAL ENTRY
0 1 NTSC3.58 VIDEO A
10
displayed. Use the CURSOR or button to select
“YES” or “NO” and then press ENTER.
• When the “ENTRY MOVE END” message will be
displayed, this completes the ENTRY MOVE mode.
• The “SIGNAL ENTRY” list will be displayed. Go
on to Step 5.
Items to select
• YES ......... Overwrites the selected signal that has
already been registered.
• NO ........... Stops overwriting.
m When selecting “ENTRY DELETE”
You can delete one of the signals in the currently selected
lines. To do this, proceed as follows:
1) Use the CURSOR or button to select “ENTRY
DELETE” and then press ENTER.
• The “DELETE : SELECT START LINE” message
will be displayed at the bottom of the screen.
2) Use the CURSOR or button to select the first of
the lines you wish to delete and then press ENTER.
• The “DELETE : SELECT END LINE” message
will be displayed at the bottom of the screen.
3) Use the CURSOR or button to select the end of
the lines you wish to delete and then press ENTER.
• The “SELECT LINE DELETE?” menu will be
displayed.
4) Use the CURSOR or button to select "YES/NO"
and then press ENTER.
• The “SIGNAL ENTRY” list will be displayed. Go
on to Step 5.
Items to select
• YES ......... Deletes the selected signal that has already
been registered.
• NO ........... Stops deleting.
P01/10-1
DELETE : SELECT END LINE
STANDALONE
NO
02
03
04
05
06
07
08
09
NAME
PAL
VGA480
NTSC
SOURCE
VIDEO
RGB
S-VIDEO
INPUT
A
A
A
SIGNAL ENTRY
01 NTSC3.58 VIDEO A
10
PAL
S-VIDEO A
SELECTED LINES DELETE?
START LINE : 01
END LINE : 05
YES NO

NEC MultiSync XG750A Specifications

General

Brand	NEC
Model	MultiSync XG750A
Category	Monitor
Language	English