38
Setting call waiting On/Off
• From the main menu, select
Settings
>
Calls
>
Call waiting
.
• Select
Active
to set call waiting on.
• Select
Cancel
to set the call waiting off.
The setting is saved and a confirmation message from the network will be displayed.
Checking status of call waiting
• From the main menu, select
Settings
>
Calls
>
Call waiting
.
• Select
Status
from the menu. A message from the network will be displayed to indicate whether call waiting is activated or cleared.
Auto redial
The
Auto redial
option allows your phone to redial an unsuccessful call up to 10 times. To set the auto redial on or off, use the following procedure:
• From the main menu, select
Settings
>
Calls
.
• Highlight
Auto redial
and press the Left Softkey to toggle automatic redial On/Off. A tick in the check box beside the option indicates the
activation of Auto redial.
Withhold ID
The feature allows you to withhold your ID when making a call to others.
• From the main menu, select
Settings
>
Calls
>
Withhold ID
.
• Press Left Softkey to withhold for all calls and Right Softkey to cancel.
The security settings protects your phone from improper and unauthorized use.
These confidential numbers should be kept in a safe place for future access, if required.
You may be required to enter one of the following security codes as shown below. When the phone prompts you for one of these codes, use the
keypad to enter the appropriate number and press Left Softkey to confirm.
• PIN code (provided by your network to protect your SIM card if it is stolen)
• PIN2 code (provided by your network for charge information and FDN services protection)
• PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)
• Phone code (default setting is “0000”)
If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
If the PIN2 code is entered incorrectly 3 times, you will need to contact your service provider for a PUK2 code.
The PIN codes and security codes are between 4 to 8 digits.
If the phone code is entered incorrectly 10 times (not necessarily in the same session), the phone code will be locked. In order to
unlock the code, you will need to contact your service provider.
Security
To Next Page
Loading...
