NEC N343i - Auto off; Countdown; Stopwatch; Auto on

81
 If you miss an alarm, you can check it by pressing Right Softkey from the standby screen when there is a clock-shaped icon
displayed in the Softkey area.
When this function is activated, the phone will be automatically switched off at the preset time everyday.
• From the main menu, select
Accessory > Clock . Highlight Auto off and press Left Softkey.
• Press Right Softkey or use  and  navigation keys to toggle the function
On / Off .
• Use  navigation key to move down to the
Time field (when the function is toggled on) to set the auto off time.
• Press Left Softkey to save the settings and return to the
Clock menu screen. A tick in the check box indicates that the function is activated.
When this function is activated, the phone will be automatically switched on at the pre-set time everyday.
 Make sure that the Auto on function is not activated when entering premises where use of mobile phone is prohibited.
• From the main menu, select
Accessory > Clock . Highlight Auto on and press Left Softkey.
• Press Right Softkey or use  and  navigation keys to toggle the function
On / Off .
• Use  navigation key to move down to the
Time field (when the function is toggled on) to set the auto on time.
• Press Left Softkey to save the settings and return to the
Clock menu screen. A tick in the check box indicates that the function is activated.
After a preset time elapsed, the function will indicate last 3 seconds of the countdown timer by a beep tone. At the end of the countdown time, a
special beep can be heard.
• From the main menu, select
Accessory > Clock > Countdown .
• Press Left Softkey to set a desired duration for the countdown. Edit the countdown timer and press Right Softkey to save the setting. Press
Right Softkey to start the countdown.
• To pause the countdown, press Right Softkey. Press Right Softkey again to continue with the countdown.
• To reset the countdown timers after pausing, press Left Softkey.
From the main menu, select
Accessory > Clock > Stopwatch . A maximum of two timings can be registered with the stopwatch.
• Press Left Softkey to start the timing. To register the first timing, press Left Softkey. To register the next timing, press Left Softkey again.
• To register only one timing with the stopwatch, press Left Softkey to start timing and Right Softkey to stop.
• To reset all time counters, press Left Softkey.
Auto off
Auto on
Countdown
Stopwatch